18
19
Problem/solution combination for failure could be:
Problem:
Programming device’s screen is too dim.
Solution:
Set brightness to maximum.
Problem:
Programming device’s screen contrast too low.
Solution:
set contrast to maximum…usually only PC/Mac
have this sort of setting (smartphones don’t).
Problem:
Programming device is too slow and cannot keep
up with required timing.
Solution:
Use a different programming device.
Problem:
Programming mode not activated properly.
Solution:
Follow procedure described above.
Problem:
Not enough light gets into the watch.
Solution:
Make sure the back of the watch is in direct
contact with the programming device’s screen. For devices
with a touchscreen, make sure you do not disturb the
script’s operation. The best way to avoid this is to lay the
