10
11
IMPORTANT
corresponds to the five white bars on top of the orange
progress bar). Depending on the quality of the light signal
received, it may take more than one attempt.
If using a programming device that has a touchscreen,
make sure the watch contact with the touchscreen is
not interpreted as a user input and does not disturb the
programming sequence. A good way to avoid this is leaving
the programming device on a flat surface with the watch
on top of it.
If your programming device has a very bright screen, you
must prevent the light sensor from becoming saturated
(when top cursor reaches 1 during programming) by moving
the watch away from the light source. It is important that
the brightness remains at the maximum setting since lower
settings may interfere with the programming sequence.
IMPORTANT
