DivioTec NBR126PA User Manual Download

Page: 58 / 67

Chapter 2: Camera Configuration

Event - SD Record Handler

SD Record Handler Configurations

Configures which type of event trigger to enable the SD recording and
scheduling function. The following options are available:

▪

Enable Trigger Alarm Detection

▪

Enable Trigger Motion Detection

▪

Enable Trigger Tampering Detection

▪

Enable Trigger Object Detection

▪

Enable Trigger Audio Detection

▪

Enable Trigger Network Loss Detection

▪

Enable Trigger Scheduled

Available

If an SD card is installed, this section will display information on the
availability of the SD card.

Usage

If an SD card is installed, this section will display the percentage of the total
storage used.

Format SD Card

Formats the SD card, all data stored on the SD card will be erased if this
option is used.

Status

Displays whether an SD card is installed or not. If an SD card is detected, ok
will be displayed; if an SD card is not detected (or a faulty SD card is used),
not_mounted will be displayed.

Summary of Contents for NBR126PA




































































Search results

Summary of Contents for NBR126PA

Reviews:

Related manuals for NBR126PA

Brands by name

Popular brands

DivioTec NBR126PA, User Manual

Search results

Summary of Contents for NBR126PA

Reviews:

Related manuals for NBR126PA

Brands by name

Popular brands