3
Chapter 1: Product Introduction
Hardware Installation
Description: The mounting surface for the bracket installation needs to
withstand at least three times the total weight of the bracket and IP camera.
1. Place the installation sticker on the installation surface (wall or ceiling).
2. Drill the four mounting holes on the sticker.
3. Insert the expansion bolts into the drilled holes.
4. Secure the wall mount bracket to the installation surface with mounting
screws.
5. Remove the bracket base of the camera and secure it to the wall mount
bracket.
6. Secure the camera to the bracket base with four flat head screws.
7. Loosen the screws on the camera to remove the cover and glasses. Adjust
the camera angle to the desired field of view.
No.
Name
1
Mounting screws
2
Wall mount bracket (ACB-02) W1 kit
3
Expansion bolts
4
Mounting screws
5
Wall or ceiling surface
6
Installation sticker
8. After adjusting the camera angle, screw the cover and glasses back into
place to secure the camera.