manualshive.com logo in svg

Divio NDR154, User Manual, Page: 18 / 39

Share
Download
Divio NDR154 User Manual Download Page 18

12

Chapter 2: Camera Configuration

Basic Settings

This section adjusts the image settings of the camera.  

Camera Name

Specify a name for the camera. The name will be displayed in the upper left 
corner on the live video stream of the camera. 

Primary Stream 1

Codec

Configures the format of the video stream, the options are H.264 and MJPEG.   

Resolution

Configures the resolution of the video stream. The available options are 
1920x1080(1080P), 1280x960(SXVGA), 1280x720(720P), 1024x768(XGA), 
800x600(SVGA) and 720x480(D1).

Quality 

Configures the image quality to Excellent, Good or Normal levels. 

Max Bit Rate 

Configures the bit rate. The available options are 20000, 18000, 16000, 14000 
and 12000. 

Frame Rate

Adjusts the frame rate of the video stream, the range is 1~30FPS if H.264 is 
selected as the codec. However, if MJPEG is selected, the range is 1~10FPS.

GOP Length

Configures the GOP length of the stream. The options are 0.5, 1, 2, 3 and 4, 
setting “0.5 seconds” will yield the best video quality.

Video - Video Stream

Summary of Contents for NDR154








































Reviews:

No comments