Divesoft LIBERTY HEAVY, Manual, Page: 19 / 26

19
Diluent routing
The three upper ports have hoses in order
from left to right 1 . BOV+DIL MAV; 2 . ADV; 3 .
Inflator .
• H HP hose runs upwards along the frame
attached with velcro straps on the side of
the tank, then passes through a hole in the
handle over the diver’s shoulder and the
gauge is attached to the chest D-ring or
under the rubber
• The BOV hose is routed in front of the
frame (between the frame and the
backplate) and is secured with velcro
straps) . It does not pass through the wing
but makes an arc over the top of the wing
and is routed along the inspiratory hose
• The ADV hose follows the same route as
the BOV hose
• It is routed through the front of the frame . On the wing it runs from the inflator elbow along
the inflator hose .
Oxygen routing
There are two hoses leading out of the three upper LP ports . The middle port is for the solenoid
hose, the outermost port is for the oxygen MAV .
• The BOV is routed in front of the frame (between the frame and the backplate) and is held
in place with velcro straps) . It does not pass through the wing, but makes an arc over the
top of the wing and is routed along the exhaust hose
• Solenoid hose – runs directly along the canister to the banjo .