![background image](http://html1.mh-extra.com/html/divertug/dt-12-combi/dt-12-combi_operating-instructions-manual_2510790017.webp)
PAG.17
TUTORIALS
.
CONNECTION OF THE BATTERY WITH EXTERNAL CHARGER
Without having to access the ba ery, we will remove the plug that we see in image 1 manually, without the
need for tools. Place in a clean area to avoid remaining dirt on the seal.
Then make sure that the charger is NOT connected to the mains and the equipment is in the off posi on (switch in
the OFF posi on) and completely dry in the connec on area.
VERY IMPORTANT!!
A.-
Connect the adapta on to the charger and then to the input of the external ba ery charger.
Image 2
B.-Plug the charger into the mains. The led will indicate the ba ery charge status. Fixed red in charge, fixed green or
intermi ent charge completed.
C.-Once the desired charge has been made, switch off the charger for the mains connec on, disconnect the adapter
from the external charger, check the condi on of the O-Ring, apply a vaseline
recommended by the manufacturer if
necessary and close the cap manually, without any need to use tools, with special care at the beginning of the thread
to avoid damaging it.
USER MANUAL DT 12/Combi
Image
1
External
Charger
cap
Image
2
Summary of Contents for DT 12/Combi
Page 1: ...PAG 1 DT 12 Combi ...