[4]
Assembly Instructions
Items not included but needed for assembly:
1.
½” wrench
Instructions:
1.
Lay the table on the floor with the bottom up. (Be sure to lay the table on a clean
surface so you don’t damage the tabletop.)
2.
Take each of the table legs and insert the stretcher stud through the predrilled
holes. The stretcher with the drilled holes goes on the top. Attach the stretcher
with the (8), 7mm X 70mm, conn, Allen head, screws provided (part #
237959)
.
Pre-drilled holes (counter-
bore located on bottom)
