background image

ASSEMBLY TEMPLATE

NOTE:

1.

REVISION LEVEL

EMK

10/31/16

CREATED DRAWING

REV.

A

-

DWN

TITLE:

BY:

BY:

APR

DATE:

DWN

APR:

DATE

REVISION:

SCALE:

SHEET:

DRAWING NUMBER:

300 South Krueger Street

Suring, WI 54174

diversifiedwoodcrafts.com

THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION

BY:

APR

APR:

DATE

STUDENT SERVICE ISLAND

STUDENT SERVICE ISLAND-SINGLE
ASSEMBLY INSTRUCTIONS

REV A

7 OF 13

NTS

EMK

10/31/16

NAME

DATE

DESCRIPTION

ECN NO.

UNLESS OTHERWISE SPECIFIED

DIMENSION ARE IN INCHES

STEP 5:

REPEAT STEPS 2-4 FOR EXTERNAL APRON ASSEMBLIES (BOTH LEFT AND RIGHT).

SUPPORT BOTH ASSEMBLIES UNTIL LEGS HAVE BEEN ATTACHED, THEY ARE NOT
STRONG ENOUGH TO WITHSTAND WEIGHT UNTIL LEGS AND TOP ARE ATTACHED.

CLOSE UP OF LEFT EXTERNAL APRON ASSEMBLY

ATTACHED TO LEFT CABINET SHOWN

CLOSE UP OF RIGHT EXTERNAL APRON ASSEMBLY

ATTACHED TO RIGHT CABINET SHOWN

LEFT EXTERNAL

APRON ASSEMBLY

RIGHT EXTERNAL

APRON ASSEMBLY

RIGHT SIDE

OF CABINET

LEFT SIDE

OF CABINET

HOLD APRON ASSEMBLIES

UP UNTIL LEGS HAVE BEEN

ATTACHED

K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\C2520, C2530, C2540K & KF,
C2720, C2730, C2740K & KF SERIES.dwg, 12/7/2018 1:22:04 PM, DWG To PDF.pc3

Summary of Contents for C2520K Series














Reviews: