NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
EMR
3/23/20
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.
THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS:
ANGLES:
CABINET SQUARENESS
DT-4SA & DT-8A
DRAWER BASE DRAWING TABLE - TWO PIECE TOP
ASSEMBLY INSTRUCTIONS
REV A
4 OF 10
NTS
EMR
3/23/20
NOTE:
1.
STEP 2:
INSERT HANGER BOLT ON ONE LEG THROUGH THE CORNER BRACKET
AND INSERT LOCK WASHER AND HEX NUT.
SCREW ON NUT USING A
1
2
" WRENCH OR
1
2
" SOCKET AND TORQUE
WRENCH.
DO NOT TIGHTEN ALL THE WAY.
REPEAT FOR THE OTHER LEG.
THE LEG WITH A CHAMFER MUST GO ON THE FRONT OF THE TABLE WITH
CHAMFERED EDGE FACING OUT.
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
CLOSE UP OF CORNER LEG ASSEMBLY
CLOSE UP OF LEG WITH A CHAMFER
LEG WITH A
CHAMFER NEEDS TO
BE FACING OUT
FRONT APRON
HINGE
FRONT LEG
BACK LEG
K:\AutoCAD\Assembly Instructions\DT-4SA & DT-8A.dwg, 11/2/2021 1:34:13 PM, DWG To PDF.pc3
