NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
EMK
4/13/15
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
WALL SERVICE BENCH
WALL SERVICE BENCH
ASSEMBLY INSTRUCTIONS
REV A
5 OF 8
NTS
EMK
4/13/15
NOTE:
1.
STEP 3:
APPLY SILICONE ADHESIVE TO TOP EDGES OF CABINETS.
POSITION TOP OVER CABINETS.
MAKE SURE ONE CUT EDGE OF THE TOP IS FLUSH WITH EDGE OF SINK CABINET.
APPLY A BEAD OF ADHESIVE TO THE TWO EDGES OF TOPS AND PRESS FIRMLY TO CONNECT TOPS TOGETHER.
BE SURE TOP IS TIGHT AGAINST WALL.
CLAMP TOP TO RAIL/BASE EVERY 12" TO REMOVE ANY WARP, USING SHIMS AND C-CLAMPS, IF NEEDED, WHEN
ALIGNING TOPS (DO THIS BEFORE ADHESIVE ON CABINET EDGES SETS UP).
LET CURE FOR 6-12 HOURS.
TOP VIEW OF WORKSTATION SHOWN
APPLY SILICONE ADHESIVE
TO TOP EDGES OF CABINETS
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\3210K, 3220K, 3230K,
& 3240K SERIES.dwg, 12/4/2018 9:10:17 AM, DWG To PDF.pc3
