ASSEMBLY TEMPLATE
REVISION LEVEL
EMK
11/8/16
CREATED DRAWING
REV.
A
-
DWN
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
1114K & KF, 1116K & KF
8' INSTRUCTOR DESK
ASSEMBLY INSTRUCTIONS
REV A
5 OF 8
NTS
EMK
11/8/16
NAME
DATE
DESCRIPTION
ECN NO.
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
STEP 4:
APPLY SILICONE ADHESIVE TO TOP EDGES OF CABINETS AND APRON. PLACE TOP ON UNIT WITH PROPER
OVERHANG (1" OVERHANG ON SIDES AND 1.50" ON FRONT AND BACK). CLAMP ON TOP TO TOP RAILS OF
CABINETS AND APRON TO REMOVE ANY WARP USING SHIMS AND C-CLAMPS, IF NEEDED, WHEN ALIGNING
THE TOP (DO THIS BEFORE ADHESIVE ON EDGES SETS UP). LET CURE FOR 6-12 HOURS.
NOTE:
1.
STEP 3:
ATTACH L BRACKETS TO APRON WITH SCREWS PROVIDED. MAKE SURE BRACKETS ARE
FLUSH WITH TOP EDGE OF APRON. MOUNT APRON TO SIDES OF BOTH CABINETS IN
DESIRED LOCATION WITH REMAINING SCREWS.
ATTACH L BRACKETS TO APRON FIRST
THEN ATTACH TO SIDES OF CABINETS
IN DESIRED LOCATION
APRON
TOP VIEW OF INSTRUCTOR'S DESK SHOWN
BACK SIDE OF INSTRUCTOR'S DESK SHOWN
APPLY SILICONE ADHESIVE TO
TOP EDGES OF CABINETS
AND APRON
DWG To PDF.pc3
