8
Filling the fresh water tank
Caution:
Max. permissible water temperature 60 °C/140 °F.
- Diversey recommends using cold water, as hot water
will adjust to the ground temperature as soon as it
comes into contact with the ground. Thus there are no
advantages to using hot water.
Dosing:
Warning:
Wear gloves, goggles and appropriate (protective)
working clothes when handling chemical products!
Danger:
Use chemical products recommended by Diversey
only and always observe the product information.
Using unsuitable products (e.g. products containing
chlorine, acids or solvents) may cause harm to health
and severe damage to the machine.
Notice:
For a precise dosing, use the scale in the dosing
cup.
- The filling level mark on the tank corresponds to the
mark in the dosing cup. The type of machine is also
noted in the dosing cup!
Dosage cup application
Notice:
TASKI offers an automatic dosing feature as an op
-
tion. It is possible to mount it additionally.
- Please contact your customer service.
Pre-cleaning
Warning:
Remove any objects (wooden, metal parts etc.)
from the cleaning surface.
The objects could be catapulted by the rotating tool, and
thereby cause injuries to people and damage to the en
-
vironment.
Beginning work with the machine
Warning:
Always wear slip-resistant shoes and appropriate
working clothes when working with this machine!
Notice:
To ensure safe operation, always keep both hands
on the steering wheel/driving handle while operat
-
ing the machine.
Warning:
When driving the machine for the first time, test it
out in an empty space to get familiar with the ma
-
chine.
Warning:
If there is a danger of falling objects during use of
the machine, the necessary safety precautions
must be taken or adhered to in accordance with na
-
tional regulations.
• The machine must be switched off (main switch).
• Put your hand into the opening be
-
tween tank cover and tank.
Palms upwards.
• Open the tank cover until the support engages in the tank
wall.
• Remove the dosage aid.
• Fill the fresh water tank with water.
Maximum filling level (page 4).
• Tip the tank cover back into its original position and press
it down until it locks.
Information on
the package of
the product
Tank capacity
Dosage cup
0.5%
1/2
1 x 1/2
MAX
1 x MAX
1%
1/2
1 x MAX (2 x 1/2)
MAX
2 x MAX
• Fill the product you have measured
with the dosage cup into the fresh
water tank.
• Slightly lift the tank cover.
• Push the tank cover support slightly inwards.
• Close the tank cover.
• By pushing gently on the front part of the tank cover you
lock the tank.
