Page | 39
h)
If some time up-grade bring any problem Pls following the below way to do firmware force flash
a) Download the latest firmware file.
b) Unzip and copy INSTALL.IMG file to the ROOT directory of a USB pen drive e.g.
P:\install.img (assuming P is the drive letter for pen drive).
c) Do not turn on the Media Center
d) Connect the pen drive to the HD Media Center.
e) Hold down the POWER button on the front panel for 5 seconds
(DO NOT RELEASE)
.
f) Switch on the rear power switch to the ON position and continue to hold down the front
power button for about 5 seconds then release.
g) Your TV MAY immediately enter into the up-grade process. Please make sure DO NOT
power off the HD Media Center and DO NOT REMOVE the pen drive.
*Note: to view the update process if your TV turns black, connect the composite cable should
display the process.
h) Firmware update should take about 2-3 minutes and the Media Center should reboot after
the process is finished.
