3
IP2250EN
General safety precautions
This installation manual is intended for qualified personnel only
•Installation, electrical connections and adjustments must be per-
formed by qualified personnel, in accordance with Good Working
Methods and in compliance with the current regulations • Read
the instructions carefully before installing the product. Wrong
installation could be dangerous • Before installing the product,
make sure it is in perfect condition •
The packaging materials (plastic, polystyrene, etc.) should not
be discarded in the environment or left within reach of children,
as they are a potential source of danger • Do not install the product
in explosive areas and atmospheres: the presence of inflammable
gas or fumes represents a serious safety hazard • Make sure that
the temperature range indicated in the technical specifications is
compatible with the installation site • Before installing the motori-
zation device, make sure that the existing structure, as well as all
the support and guide elements, are up to standards in terms of
strength and stability. Verify the stability and smooth mobility of the
guided part, and make sure that no risks of fall or derailment subsist.
Make all the necessary structural modifications to create safety
clearance and to guard or isolate all the crushing, shearing, trapping
and general hazardous areas • The motorization device manufac-
turer is not responsible for failure to observe Good Working Methods
when building the frames to be motorized, or for any deformation
during use • The safety devices (photocells, safety edges, emergen-
ATTENTION! Important safety instructions.
Please follow these instructions carefully. Failure to observe
the information given in this manual may lead to
severe personal injury or damage to the equipment.
Keep these instructions for future reference.
This manual and those for any accessories can be
downloaded from www.ditecautomations.com.
