EN
EN
Table of contents
disty
Notruf NEO
21
Commissioning
23
Charging
23
Subscribe and pre-programm the alarm numbers
24
Mode of operation
25
Make a direct call
25
Contact chain/alarm confirmation
25
Cancelling a direct call/an alarm
26
Accepting calls
26
Range warning
26
Alignment of the user interface
26
Troubleshooting
27
Wearing options
29
Tips & tricks
31
Switch device off
31
Personal alarm
31
Configuring the device without
the “ProgrammerApp” (PC)
32
Reset/Unsubscribe
34
Technical data
35
Declaration of conformity
35
Safety information
36
20
Operating instructions
Operating instructions
21
Congratulations!
You are the owner of a
disty
Notruf
NEO
DECT/
GAP telephone accessory, which can be easily
operated with the touch of a button
disty
Notruf
NEO
is the direct connection to your
trusted contacts
You determine who you would like to speak to directly in the
case of an emergency. You may pre-programm up to 5 telephone
numbers. For this,
disty
Notruf
NEO
must be first subscribed
into the DECT base station of your telephone (see page 23).
Once you have pressed the alarm button,
disty
Notruf
NEO
dials the first of your pre-programmed telephone numbers and
you can speak directly as soon as the receiver answered the
incoming phone call. The receiver must confirm their acceptance
of the call by pressing the “#” key on their telephone. If this
confirmation is not received because the receiver is not there,
the line is engaged or the answer machine is triggered, then
disty
Notruf
NEO
automatically calls the next pre-programmed
number until the emergency call is personally accepted and
confirmed.
