Disty distybox 300, Operating Instructions Manual

Page: 9 / 35

Operating instructions Operating instructions 16 17
EN EN
Important information
The
disty
box 300 is a DECT‑standard cordless adapter for
universal usage when operating analogue terminals on GAP‑
compatible DECT systems. Essentially a ”cordless extension
cable”, the
disty
box 300 eliminates the need for complicated
cabling work and can be registered on any standard DECT/
GAP base station just like an extra cordless handset. The
disty
box 300 can be used to connect analogue telephones,
fax machines, answering machines, entrance intercoms and
modems to your DECT base station. The device must use
DTMF dialling (voice frequency signalling); terminals that only
support pulse dialling cannot be used on the
disty
box 300 . If
your device uses pulse dialling, please check if it can also be
switched over to DTMF dialling.
The
disty
box 300 features an integrated aerial and has a
standard DECT range of up to 30 m indoors and up to 300 m
out of doors.
More information can be found in the download area on our
homepage
www.disty.de
NOTE
Connections and indicator
1 Power supply
2 Power supply unit (adapter)
After plugging in the power supply unit, the handset on the
connected telephone must remain on the hook for at least
30 seconds.
Only the power unit supplied should be used. Before opening
the housing, ensure that the power supply unit is disconnected!
3 LED
I ‑ time interval 8 sec ‑ I LED on
LED off No power supply
Ready to use / standby mode /
power available (220 / 230 V) /
device is registered at a base station
Incoming call alert
Connection
Programming mode (Menu)
Search for the base
Found the base
No Basis
220/230V
50 Hz
2
1
4
3
1 m
NOTE
NOTE