Disty distybox 300, Operating Instructions Manual

Page: 13 / 35

Operating instructions Operating instructions 24 25
EN EN
Function Parameter Other input
code
40 2 #
Send always Keypad Information: This setting has to be used
if your base station is a distybase Duo or other specified ISDN
system.
Factory setting: 0
Set PARK 80 PARK nummer #
number
As an option, the registration process can be carried out
using the PARK number of your DECT base station (PARK =
Portable Access Rights Key). This can have up to 15 digits.
The procedure is advisable if the registration process cannot
be completed due to other active DECT base stations. Please
refer to the user’s guide for your base station for further
details about PARK numbers.
Factory setting: no PARK number set.
Activate PARK/ARI 81 0 #
number
The PARK/ARI number set under programming point
80/85
is not used during the registration process.
81 1 #
The PARK/ARI number set under programming point
80/85
is used during the registration process.
Factory setting: 0
Function Parameter Other input
code
Set ARI number 85 31 ARI #
Instead of the PARK number (see Parameter 80) the ARI number
can be used for subsciption. For input of the ARI number use 31
as prefix.
Factory setting: no ARI number set.
Reset disty
box 300
90 #
The
disty
box 300 is reset to the factory settings.
This means, however, that the
disty
box 300 is no longer re ‑
gistered on a base station. All previous settings are deleted.
After unplugging / plugging in the adapter, the
disty
box 300
is restarted and reprogramming of the
disty
box 300 can begin.
Reset parameter 91 #
The
disty
box 300 remains registered on the base station;
all other parameters are reset to the factory settings.
After entering the parameter, replace the handset and wait for
30 seconds. The
disty
box 300 will be restarted automatically.
NOTE
NOTE