disty-guard, operating instructions
Requesting / Setting parameters & Functions
Parameters can be configured in the
disty-
guard
using the programming station that can
be ordered as accessory.
The following is a description of the handling.
With the
Single Charging station with programming function
(PS), the battery of the
disty-
guard
can either be charged or some settings modified through data transmission.
To charge the
disty-guard
using the PS, it must be plugged into the station without
entering a command.
A PC with USB connection is required to use the PS for the setting of parameters.
The PS will now be connected to the PC through a USB cable.
Note:
If applicable, the installation of a driver ( = Virtual Com-Port ) may be
required ( CDC driver,
USBLadestation.inf
).
The
disty-guard
is not plugged during installation.
The programming tool ( ‘disty Programmer App’ ) can be downloaded from the homepage
of the company Disty. Save it in a folder of your choice and activate it. A window will
appear with the question:
Execute
or
Cancel.
Clicking on
Execute
will open up the operating
program.
Page 11 of 25
PC
USB
12VDC/
150mA
PS
Programming station
Summary of Contents for disty-guard
Page 1: ...disty guard Operating Instructions Antibacterial version white Standard version black ...
Page 26: ......
Page 27: ......
