8 / 9
Remote Channel
Up to two (2) UNIWAVE devices can connect to a single EC-Multi-Sensor-BLE, however each UNIWAVE device must be on a separate channel.
Use the UP and DOWN arrows to choose either channel A or channel B. Press the OK button to validate your choice.
BLE PIN Code
The BLE PIN Code is required if the EC-Multi-Sensor-BLE is set to Private Connection.
The BLE PIN Code must be the same one that was assigned to the EC-Multi-Sensor-BLE in the initial programming of the ECLYPSE controller. The BLE
PIN Code can be viewed or changed from the ECLYPSE Web Interface for that specific ECLYPSE controller. This BLE PIN Code is also required for the
my
PERSONIFY mobile application.
Use the UP, DOWN, LEFT, and RIGHT arrows to input the correct Bluetooth PIN Code, then press OK to validate your code.
If you are changing the connection mode from Private to Open, the BLE PIN Code on the UNIWAVE device must also be changed back to
its initial value of 000000.
