Distech Controls Allure UNIWAVE, User Manual

Page: 9 / 16

9 UNIWAVE
CHAPTER 5
Temperature Control
The main temperature settings can be adjusted here. Ambient temperature or the temperature set-
point (depending of the configuration) is displayed in the middle of the screen.
Depending on the programming with EC-
gfx
Program and the model of UNIWAVE, certain options may
not be present.
Icon Description
The percent humidity is indicated here.
The measured carbon dioxide level (in ppm) is indicated here.
The temperature setpoint and heating/cooling mode is displayed here. Use the UP and DOWN arrows to
adjust the temperature, then press the OK button to validate the change.
Depending on the chosen programming, the setpoint offset may be displayed instead.
Temperature Control