3 / 8
Figure 3: Mounting using wall screws
Associating with the Receiver
Once the Allure ECW-Sensor is installed, it must be associated with the receiver it will communicate with. Association with the receiver can be done in
one of the following two ways:
1. Manually – Enter the sensor’s module ID into the receiver’s configuration menu (or controller’s wireless input settings).
2. Automatic learning – Use the Learn button so that the receiver automatically detects and identifies the sensor. When the Learn button is pressed, a
teach-in telegram is sent to the receiver with information on the sensor’s profile, type, and manufacturer ID.
The 868MHz model is a category 2 receiver.
For the 868MHz model only:
£
Center frequency: 868.3MHz
£
Occupied frequency band: 868.0 - 868.6MHz
£
Maximum transmission power: 3dBm
For the 902MHz model only:
£
Center frequency: 902.875MHz
£
Occupied frequency band: 902.7-903.0MHz
£
Maximum transmission power: 1dBm
For more details on how to perform the above two procedures on Distech Controls’ Open-To-Wireless ready controllers, refer to the appropriate product
user guides.
Figure 4: Location of the Learn button
