DISTEC Brilan 4K Series, User Manual, Page: 9 / 37

First Installation
9
Allowed tilt angle for mounting
Attention! All monitors are not allowed to be mounted with a tilt angle of 0°.
Connecting to power
The Brilan 4K monitor requires an AC voltage of 100-240 V AC. The standard delivery includes a suitable power cable for connecting
the power supply.
Please pay attention that there is a suitable socket near the device, as a disconnecting device.
Note: Install all data cables to external devices before connecting the display to power.
• Switch the on/of switch in position off.
• Connect the power cable to the display.
• Connect the power cable to a power socket.
• Switch the display on .
Infrared sensor
The IR sensor is located in the lower area of the back of the monitor (42.5“ - 74.5“). Due to the reflections on the wall, settings of the
monitor can be made with the remote control.
With the 85.6 “monitor, the sensor is located behind the panel; direct alignment of the remote control with the monitor is also sufficient
here.
On/Off Button Power supply