DISTEC Brilan 4K Series, User Manual, Page: 18 / 37

Brilan 4K monitor controller
18
Gamma Input Color Format
Color Range
1.3 VideoWall
This setting is required for VideoWall operation to map the monitors to the
positions.
X Max: Number of columns into which the image is divided. (up to 11 columns)
Y Max: Number of lines in which the image is divided. (up to 11 lines)
X position: Column position of the monitor in the wall.
Y position: Row position of the monitor in the wall.
X Gap: Proportional value of the X-axis panel edge with the unit per thousand
Y GAP: Proportional value of the Y-axis panel edge with the unit per thousand
Set ID: Assigned ID of the monitor (identification for IR Remote or RS232)
1.3.1 Adjust Set ID
After activating Set ID, the following window appears:
•
Here, the ID of each monitor is set to identify it in the wall configuration.
• The ID is important to be able to address the monitor individually via the IR Remote or the RS232.
•
The ID defines the total active monitors (in example 15) and the ID of the currently selected one (in example 11)
1.Press the BLUE button and then use 0 ~ 9 button to select the Active SET ID.
2.If Press the RED button, delete ID number.