Video Wall User Manual
11
Then press “SOURCE” on the remote control to enter Input Source List
Select the signal source according to the “
△”, “▽”button, then press “ENTER”. The
LCD
unit will enter the corresponding signal source.
VGA
：
1920*1080/60Hz
AV
（
CVBS
）：
PAL/NTSC
HDMI/DVI
：
480I/480P/720P/1080I/1080P
3.2 Signal source selection
Each LCD unit can be an independent LCD display, which has the following signal source:
VGA, DVI, HDMI, AV1, AV2, USB
If you want to change the signal source, please press the “SHIFT” button on the remote
control, then the screen will show “ID Set Succeed” on the top right corner. Please note
you must press "SHIFT" first, if not done first it will display "ID Set Error"
