WARNING
!
Do not begin the installation until you have read and understood the instructions and
warnings contained in this installation sheet
.
If you have any questions
regarding any of the
instruction or warning
,
please contact your local distributor.
This mounting bracket was designed to be installed and utilized ONLY as specified
in this manual. Improper installation of this product may cause damage or serious
injury.
This product should only be installed by someone of good mechanical ability with
basic building experience and full understanding of this manual.
Make sure that the supporting surface will safely support the combined load of the
equipment and all attached hardware and components. Never exceed the maximum load
capacity
.
If mounting to wood wall studs, make sure that mounting screws are anchored
into the center of the studs
.
Use of a stud finder is highly recommended.
Always use an assistant or mechanical lifting equipment
to
safely lift and position
equipment.
Tighten screws firmly, but do not over tighten
.
Over tightening can damage the items,
greatly reducing their holding power.
NOTE:Read the entire instruction manual before you start installation and assembly.
