14
Align holes of the iPad holder to the
post fixings. Insert and tighten 2 screws
to secure. Rotate iPad holder through
90º, aligning remaining 2 holes to post
fixings. Insert and tighten final screw to
secure (in diametrically opposite hole
from tightened screw in stage 8).
Plug charge/sync cable into iPad and
place inside enclosure, gently press
all four corners of iPad down into
mouldings to hold.
NB – If you are
not using cable management
for charging, unlock the iPad enclosure by
inserting key into security lock and rotate ‘QUARTER TURN ONLY’ clockwise or counterclockwise
through 90 degrees which releases the locking pin. Return key back to original position to remove.
Lift fascia out of enclosure, and place iPad inside, gently pressing all four corners down into
mouldings to hold.
13
