background image

 

Displays2go                                                                                                                                        Rev. 04/24/19

 

 
 
 

 

Do not let children climb onto the Digital Signage. 

 

Keep the small parts away from children to prevent them from swallowing. 

 

If 

the Digital Signage won’t be used for a 

long time, please turn it off and pull out the power plug. 

 

To adjust the position of the Digital Signage, please disconnect all power cords and move slowly to 
avoid tip over. 

 

Do not scratch or knock the LCD with hard object, or twist and squeeze the LCD. 

 

Do not turn on the unit immediately when it is moved from a place with low temperature to high 
temperature, or else it will cause condensation and malfunction. 

 

Before cleaning the Digital Signage, please pull out the power plug; wipe with soft cloth; do not 
use  industrial  chemicals;  prevent  foreign  matters  from  entering  the  machine.  Improper  cleaning 
(such  as  cleaning  solution,  water)  may  damage  the  product,  erase  the  printed  information,  and 
even cause damage of the components if fluid flows in, resulting in machine failure. 

 

If the unit displays the same screen for a long time or the moving picture has fixed text or icon, it 
will leave ghosting on the screen and won

t disappear when the unit is turned off; it is normal and 

isn

t covered by the warranty. 

 

The power of the Digital Signage can be cut off by pulling out the plug. 

 

If  the  LCD  screen  ruptures and the  liquid  splashes  on the  skin, please rinse  for  15 minutes with 
clean water immediately, and consult your doctor. 

 

To carry the Digital Signage with hands, please grab and hold the edges; do not apply pressure on 
the panel. 

 

Use  the  Digital  Signage  properly:  Use  in  proper  lighting  conditions;  insufficient  lighting  or  long 
time watching will impair your eyesight. 

 

When the plug or coupler is used as disconnection device, it should be easy to operate the device. 

 

Insert the plug into the outlet properly, or else it may cause sparks and fire. 

 

The technical specifications printed herein and on the packaging are subject to change without prior 
notice. The Manual may be slightly different from actual operation, and the latter is applicable. 

 
 

  Assembly and Connection 

  Packing List 

 

Name 

 

 

Name 

 

1 Digital Signage 

 

 

1 Power Cord 

 

1 Remote Control 

 

 

1 Cleaning Kit 

 

1 Operation Manual 

 

 

Two Keys 

 

Note: 
Contact local dealer if you have questions about the operation, debugging and connection of the unit; if 

the unit doesn’t work normally, please cut off the power immediately and consult the dealer. The unit is 

class-A  product,  which  may  cause  radio  interference  in  living  environment.  In  this  case,  please  take 
feasible measures, and use power plug as the disconnection device.

 

      Caution

 

Summary of Contents for DG21FLR5P



























Reviews: