Tighten
4
Screws (Part F)
against the
surface of lower poles with hex key.
Insert
Tube Connectors (Part E)
into the
Fixed
Lower Tubes
.
Hold it in place
when
lining up holes. (Align with the top holes on
Lower Tubes
)
Insert
Upper Tubes (Part D)
into
Tube
Connectors
from above. The holes should
line up with the holes on
Connectors
.
Fasten
4
Screws (Part F)
with hex key.
Ensure the 2 slot cutouts are facing
the same direction as other cutouts
on the
Lower Tubes
.
Insert
Lower Tube
into the upright on
the
Metal Base
.
Ensure slot cutouts on uprights
and
Lower Tubes
align with
each other.
Holes at top of
Lower Tubes
should
face outward, to align with the holes on
Tube Connectors
. (See
STEP 4
)
Before assembling, remove packing materials.
Carefully place the
Metal Base (Part B)
on a
hard, flat ground.
Fix
Lower Tubes
by tightening
4 screws
at
bottom of the TV Stand.
Fix
Tube Connector (Part E)
on top of the
Lower Tube
.
Insert
Upper Tubes
with
Connectors.
Insert
4
Screws (Part F)
through
Lower
Tubes
into
Connectors
. Fasten screws
with hex key.
E
B
F
C1
C2
D1
D2
If securing the whole unit to the floor,
use hardware through 4 corner holes
to fix the base.
ALL SCREWS MUST BE SECURELY TIGHTENED BEFORE USING TV STAND.
FLAT BASE TV STAND
55 Broadcommon Road Bristol, RI 02809, USA Phone: 1-800-572-2194 1-401-247-0333 (Int'l) Fax: 1-401-247-0392
2
3
4
5
2
Still have questions? No worries. If you’re confused during any step, just call the number located at the
bottom of the Instruction pages. Our friendly representative will be more than happy to assist you.