A series of tucks reduces excess silicone.
Pulling on the silicone welt during installation stretches the silicone and
creates a bulge in the silicone welt that is difficult to correct smoothly.
Tuck
Tuck
Tuck
Press While
Sliding Hand
Pull
INCORRECT
CORRECT
Silicone
Bulge
Graphic Installation Instructions
Caution! Installing silicone-edged graphics is techniqe sensitive;
Practice will shorten installation time.
Handle graphics with care with clean hands in a
clean environment. Clean cloth or latex gloves
are recommended.
How to Install SEG Graphics:
Turn and tuck the side of the graphic with the silicone welt into the SEG groove.
The stitched ege goes into the groove first.
Stitched edge
goes in first
SEG
groove
Start in
the corner
Installing Fabric Graphics with Endcaps
A. Tuck the graphic into left/upper endcap SEG
channel and partially down the vertical channel bar.
B. Holding the graphic off of the ground, tuck the
center of the graphic on the front of the frame.
C. Tuck the graphic into the right endcap.
D. Complete installation of the top
edge of the graphic.
E. Tuck the bottom/front corners
and the middle of the bottom/front.
F. Complete installation on the
bottom/front.
G. Complete installation of both
endcaps.
A
B
C
G
G
G
G
D
D
E
E
E
F
F
displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343
10’ x 10’ Inline Display Kit A
Assembly Instructions
GRAFFITI:Plus
Graffiti:Plus V.2 Updated 10/10/2019
3
