3-piece channel bar
Snap
Frame Lock
1. Set the frame standing on end. Grasp
two of the middle hubs (circled in
orange) and gently expand the frame.
Note the location of the adjustable feet
for future reference.
4A. Slide one end of the first channel
bar onto the connection point of one
of the corner hubs. The triangular
channel bar’s thinner edge goes
toward the inside of the frame.
4B. Snap the slots in the back of the
channel bar onto the nubs on the hubs.
4C. Attach the other end of the
channel bar to the other corner hub.
Repeat steps 4A-4C for all channel
bars as seen in the diagrams above.
2. Snap all frame locks (marked
in red in the diagrams below) to
secure the frame.
It is recommended to assemble
the frame with it laying on its back.
3. Unfold and slip together each
bungeed channel bar.
Adjustable Feet
Corner Hub
Thinner Edge
Slot
Nub
2.5 Foot Frame
1-piece channel bars
3-piece channel bars
8 Foot Frame
3-piece channel bars
3-piece channel bars
displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343
10’ x 10’ Inline Display Kit A
Assembly Instructions
GRAFFITI:Plus
Graffiti:Plus V.2 Updated 10/10/2019
1
