User manual in Original
Doc. ref: 500A_MC_am_en_210602
DISPERATOR AB
Tel: 08-724 0160
E-mail: [email protected]
Mälarvägen 9, 141 71 Segeltorp
Web page: www.disperator.se
11 / 44
10 / 44
Our product range is designed with the user’s needs in focus and meets today’s requirements for
handling of food waste. The high-quality grinding unit of specially alloyed steel together with the unique
and well-proven sealing design between the grinding unit and motor provides the user with many years
of operational reliability and low maintenance cost. The disposer’s life span is extended further by the
outer housing of stainless steel EN 1.4301 (AISI 304) and protection class IP55 for electrical components
as standard.
The wide range of disposer sizes, and where each size fits all models of assemblies, makes it easy to
customize each installation of disposer to fit all workplaces in kitchens onshore as well as at sea. The
Excellent 500-Series disposers may be installed under sinks and washing lines, into tabletops and working
benches or as freestanding separate units. Installation into an existing kitchen furniture manufactured by
another supplier is also possible. For CE-marking an approved assembly with protection above disposer
inlet is needed from Disperator or other manufacturer.
Standard delivery includes a complete start/stop unit with contactor and motor overload protector, and
a complete solenoid valve with line strainer, which for some of the assembly models need to be installed
and connected on site in the kitchen. Cold water will automatically flow when the disposer starts, flushing
the food waste into the grinding chamber, and then into the sewer system or a storage tank.
Food waste disposers within the Disperator Excellent-Series have the Declaration of Compliance issued by
DNV, verifying compliance with applicable sections of IMO MARPOL consolidated edition 2017 ANNEX V
for disposal of ground food waste into the open sea
Summary of Contents for 500A-MC EXCELLENT Series
Page 2: ......
