17(35)
User manual in Original
Dok. ref: User manual 500A-ATF-K Rev. F
DISPERATOR AB
Tel: +46 8 724 0160
E-mail: [email protected]
Mälarvägen 9, SE-141 71 Segeltorp, Sweden Fax: +46 8 724 6070
Web page: www.disperator.se
2.
Put the inner part of the bushings (2) and the O-rings on the axle of the protective lid (1), on each
side of the lid. Put the lid into the sink by slipping the axle through the holes made in step 1 of this
instruction. Put on the outside of the bushings and thighten them by hand.
3.
Fit the lock mechanics (5) on to the safety interlock switch (6), do not thighten any lock screws. Fix
the safety interlock switch on to the mounting plate (3). Use 2pcs of M4 screws, shims and
locking nuts (7).
4.
Fit the mounting plate assembly (3) on to the axle of the protective lid (1). Use the mounting plate
as a template for the 2 mounting screws (4). The holes should be a square with the side 6,7mm. If
no square punsh is available, drill holes with the diameter 9mm. Remove the interlock assembly.
