PROBLEM LABELS: Very thin stock such as acetate, mylar, or vinyl may not release from the carrier paper,
but instead will continue down around the table and remain on the carrier. We can provide a special sharp edge
plate and tension kit which will usually work for dispensing these labels. (This is already included with the
U-25) If you supply us with a sample roll of your labels we can diagnose if the sharp table will work, or what
other modification can be made to dispense them.
MULTIPLE ROW LABELS: Some label printers will put more than one of the same label side-by-side on the
carrier. These labels are not a problem as long as the label length does not exceed 1 ½” in length, just peel the
labels from right to left, and once the left most label is peeled the machine will automatically advance the next
row.
6.
WASTE CARRIER PAPER REMOVAL:
The more carrier paper waste permitted to wind on the take-up
spool, the faster the movement of the web thru the dispenser. This may or may not be beneficial to the dispens-
ing operation. Waste should be removed periodically as necessary. It only takes a few moments when done
properly. To remove waste, rotate the roll of waste counter-clockwise, reversing its winding direction and loos-
ening the winding. When sufficiently loose, pull the spring-clip straight out and then remove the waste easily
from the spool.
7.
CLEANING: MAKE SURE MACHINE IS UNPLUGGED!
Cleaning adhesive from the machine is accom-
plished by using a safe for plastic solvent such as Naptha, or Lighter fluid containing Naptha.
MAKE SURE
ALL SOLVENT HAS EVAPORATED BEFORE PLUGGING IN MACHINE!
8.
WARRANTY: This unit is covered by a full 3 Year Warranty from date of purchase. If anything fails
on the label dispenser within the first 3 years we will repair the unit, and return shipment within 2-days!
(This warranty does not cover abuse of the machine due to dropping, or bending the rods or side-frame.)
9.
Service:
In the unlikely event your machine needs service after 3 years, just return the machine to us and we
will diagnose your machine the same day we receive it! If you approve the repair costs we will ship it out the
very next day! Please make sure to include a note with a description of the problem, and a phone number we
can use to contact you!
10.
Shipment to us is FOB, and return ground UPS shipping is covered under the warranty. After warranty expires
return shipping is FOB. Our address is:
Dispensa-Matic Label Dispensers
28220 Playmor Beach Rd
Rocky Mount, MO 65072
13.
Included with the machine:
2 Allen wrenches ( Large for dispensing plate adjustment, small for lateral sensor adjustment)
Operating Instructions
Warranty
Summary of Contents for U-25
Page 4: ......
