11
10
PC1500LTP
15’’ TFT-LCD TV
Switching On
Mains Power
Plug the mains plug into a mains socket to switch on the main power switch (located on the
rear cabinet) then the red power indicator will light up.
Press the
STANDBY
or
CHANNEL UP/DOWN
button on the unit or remote control to turn ON
the TV.
To switch the unit to standby, press the
STANDBY
button on the unit or remote control, then
the red power indicator will light up.
Automatic Switch to Standby
In the absence of a picture signal, the LCD TV will automatically switch to standby after
approximately 10 minutes.
NOTE:
When not in use for long periods, disconnect from
the mains power supply, or switch OFF the main power switch.
Inserting Remote Control Batteries
On the back of the remote control, Loosen the screw to open the battery compartment cover.
Insert two AAA batteries, ensuring that you follow the polarity diagram inside the battery
compartment.
Screw the battery compartment cover on the battery compartment.
Battery Disposal
Please ensure batteries are disposed of safely. Never dispose of batteries in the fire or with
household waste. Check with your local authority for disposal regulations.
The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such
as sunshine, fire or the like.
CAUTION
•
Do not attempt to recharge, short-circuit, disassemble, heat or throw the batteries into the
fire.
•
Placing with wrong or mixed polarities batteries will result in damage to the batteries and
/or may result in a malfunction of the unit.
•
Do not mix old and new batteries.
•
Dispose of batteries properly in accordance with local law.
•
Do not mix alkaline, standard (carbon-zinc),or rechargeable (nickel-cadmium) batteries.
PC1500LTP IB UK(ENG) 0211-12133-20AA.p65
2007/9/4, 上午 11:25
10-11
