Setup
Battery : USE SIX SIZE “C” or UM-2
1.5V BATTERIES
Plug one end of the included AC adapter into the
DC IN
jack. Plug the other end into
any standard AC power outlet to power the karaoke player.
Once connected, set the
SOURCE
switch so that the correct source is selected.
Remove the battery compartment cover on the back of the unit by carefully
pushing the two lugs down. The battery cover can then be lifted away. Fit six
1.5V size C batteries (not included), making sure they are inserted with the correct
polarity (+,-) as displayed in the battery compartment. Finally, replace the cover.
•
•
•
Be sure that the batteries are correctly installed with the correct polarity.
•
Do not mix old and new batteries.
•
Only same or equivalent type batteries as recommended are to be used.
•
Remove batteries if you will not be using your device for an extended period of time.
•
•
Do not try to recharge alkaline or any non-rechargeable batteries.
Power (Connect Battery)
7
Unplug the AC adapter first when using batteries.
Do not expose the batteries to excessive heat, sunlight or fire.
Do not dispose of batteries in fire. It may cause them to leak or explode.
Wall Outlet
AC~120V 60Hz
AC adapter
