2.2.1.2 OSD Language
Set the On Screen Display Language.
2.2.1.3 Audio Language
Set the audio language for watching program.
2.2.1.4 Subtitle Language
Set the language for displaying subtitle.
2.2.1.5 Auto Time Zone / Time Zone
Allow you to enable or disable auto time zone offset update.
If you know the GMT(Greenwich Mean Time) time zone offset of your location,
set the
Auto Time Zone
to
OFF
and select an appropriate
Time Zone
, otherwise set it to
ON
and let the system update the time zone automatically according to the transport
stream.
2.2.1.6 Auto Scan
Press <RED> button to start
Auto Scan
. See section
1.2.1
for details.
2.2.1.7 Manual Scan
Press <GREEN> button to start
Manual Scan
. See section
1.2.2
for details.
2.2.2.1 TV Format
Set display format for watching program, such as
4:3LB, 4:3PS, 16:9PB,16:9AUTO.
4:3LB(LetterBox)
: Typically for wide screen content displays on conventional 4:3 TV
with black bars above and below the picture.
4:3PS(PanScan)
: Typically for wide screen content displays on conventional 4:3 TV
with left and right edges cropped.
16:9PB(PillarBox)/16:9 AUTO
: Typically for wide screen 16:9 TV.
4
2.2.3.3 Censorship Lock
Lock the program by password and censorship threshold. The censorship info is in
program content. Under the censorship rating, user has to enter the right password for
watching program.
2.2.3.2 Channel Lock
Lock the channel which has been set to lock status when turning on the
Channel Lock
.
Please see section
2.3.1.2
for details.
2.2.3.1 Menu Lock
Lock the menus by password.
2.2.3 Password
Set password for menu lock or channel lock or censorship lock. And the user can
change password here, the default PIN Code is
6666
.
2.2.2.5 Video Output
Set the video output mode to TV.
2.2.2.4 Banner Display Time
Set Banner displays time. Banner doesn't disappear when set as "Always" and
disappears at timeout when set as other values.
2.2.2.3 OSD Transparency
Set the On Screen Display transparency. 1 is the most transparent.
2.2.2.2 TV Mode
Set PAL, NTSC or AUTO for display. AUTO will switch PAL or NTSC by program content.
This setting should be matched with user's TV.
Figure 8. TV Setup
01/01/08 00:19
Move
Switch
Exit
TV Format
TV Mode
OSD Transparency
Banner Display Time
Video Output
16:9 PB
SETUP- TV Setup
AUTO
6
3 S
CVBS
2.2.2 TV Setup
Setup the display mode for TV. See Figure 8.
2.1 Main Menu
Main Menu
for operating a lot of functions.
(1)
Press <Menu> button to enter
Main Menu
.
(2)
Press <Info> button to display the version information of STB.
2.2 SETUP
Set the system settings of STB.
2.2.1Installation
Installation menu include
General Setting
,
MY DISH
and
TP MANAGER
.
2.2.1.1 General Setting
Set the receiving and playing program settings of STB, as Figure 7.
2.Menu Operations
Once the channel scan is finished and all the channels are stored into the database,
you can start to watch the digital TV channel or listen to the radio broadcast, some
typical operations are given in this chapter.
2.2.4 Advance Timer
User can set timer for watching the program by date and time manually or from the
TV/Radio Guide
(see section
2.3.2
). When setting date and start time is arrived,
STB will automatically switch to the wanted program. Press any key except
<Vol-/Vol+/Mute> button, STB asks user to abort it or not when watching booked
program. User can delete the event while it isn't at running.
2.2.3.4 Change Password
To change the PIN code, select this option, press <Left/Right> button to trigger
changing password and <0~9> buttons to enter old password, new password and
confirm new password. If succeed, the
PIN Code Changed
message will be displayed,
otherwise the
PIN Code Error
message will be displayed.
