SETUP- Installation ( MY DISH )
01/01/07 00:03
Switch Type
DiSEqC 1.2/ USALS
Page 1/8
Move
Switch
Exit
Set East Limit
Set West Limi
NONE
NONE
NONE
NONE
Pos ition 01
Pos ition 02
Pos ition 03
Pos ition 04
Set Limi t
Disa ble Limit Clea r
Goto R ef. GoTo
Move Step Stop
Move Conti nue Stop
User Interface
1.1 Setting Language
User can select preferred language at Setup Installation General Setting page.
(1)
Press <Menu> button to enter
Main Menu
.
(2)
Press <Left/Right> button to select
SETUP
option.
(3)
Press <Up/Down> button to select
Installation
option.
(4)
Press <Up/Down> button to select
General Setting
option.
(5)
Press <OK> button to enter
General Setting
page.
(6)
Press <Up/Down> button to select the language
option.
(7)
Press <Left/Right> button to set a language.
1.2.2 Transponder configuration and scan
If there exist satellite in the database, then user can edit and scan transponder in the
menu Main Menu Setup Installation TP MANAGER, as Figure 6.
Press <Left/Right> button to select satellite;
Press <Up/Down> button to select transponder.
Press <OK/Up/Down/Left/Right/0~9>, user can edit Frequency, Symbol Rate or
Polarity of the transponder.
Press <BLUE> button to scan the focused transponder.
1.Quick Installation
3
Figure 6. Scan for Transponder
Figure 7. General Setting
SETUP- Installation (Transponder Manager)
01/01/08 00:19
Move
Switch
Exit
Satellite Name EUTELSAT W3A
No.
001
002
003
004
005
006
007
008
Frequency
10928
11345
11471
11513
11554
11595
11637
11679
Symbol Rate
30000
27500
30000
27500
27500
30000
30000
30000
Polarity
H
H
H
H
H
H
H
H
OK
Edit
Scan
Delete All
Del
Add
00 00
S
Q
01/01/08 00:19
Move
Switch
Exit
SETUP- Installation (General Setting)
OSD Language
Audio Language
Subtitle Language
Auto Time Zone
Time Zone
English
English
OFF
OFF
+ 08:00
1.2 How to receive the programs?
Scan the satellites to receive the programs.
1.2.1 Satellite configuration
Satellite configuration and manager is in Main Menu->Setup->Installation->MY DISH
menu.
Firstly, select the proper switcher according to the switcher you have, as Figure 1.
For sample switcher, each branch is connected with a satellite, user can configuration it
as Figure 2.
Then user can press BLUE key to scan the focus satellite or RED key to scan multi-
satellites, as Figure 5.
Scan Mode:
select Blind-Quick or Blind-Detail for blind scan, or Default to scan the
default transponder list.
Programme:
select to receive all programs or only free programs.
For DiSEqC1.2 motor, user can set limit position, user location and LNB of it, as ,then
user can adjust and store max 32 position for different satellites, as Figure 3, Figure 4.
Switch Type:
select DiSEqC1.0/1.2 switcher or DiSEqC1.2 motor, or select none if you
don't have any DiSEqC device.
Toneburst:
enable or disable toneburst switcher.
move down to the satellite selection area, and press OK key to add the proper satellite,
as Figure 2.
LNB Type:
select the LNB type according to your dish.
LNB Low Freq:
set the low frequency of LNB.
LNB High Freq:
set the high frequency of LNB if it is universal.
Figure 1.Satellite Installation
Figure 2.Add Satellite
Figure 3. DiSEqC1.2 Setting
Figure 4. DiSEqC1.2 Motor Limitation
Switch T
Toneburs
Exit
Add SAT
Edit
SETUP- Installation ( MY DISH )
01/01/07 00:02
Strength 00%
Quality 00%
Satellite Name
LNB Type
LNB Low Freq
LNB High Freq
22K Tone
LNB Power
Transponder
Figure 5. Scan Mode
SETUP- Installation ( MY DISH )
01/01/07 00:03
Toneburst
OFF
NONE
Switch Type
Programme
All
Bli nd-Det ail
Scan Mo de
Sca n Mod e
Move
Switch
Exit
OK
Scan
7.0 E
Move
Switch
Exit
SETUP- Installation ( MY DISH )
01/01/07 00:02
Switch Type
Toneburst
OFF
NONE
NONE
SETUP- Installation ( MY DISH )
01/01/07 00:02
Switch Type
DiSEqC 1.2/ USALS
Page 1/8
NONE
NONE
NONE
NONE
Pos ition 01
Pos ition 02
Pos ition 03
Pos ition 04
Move
Switch
Exit
Set LNB
Set Location
Set Limit
