22
Troubleshooting
No picture
T1050 is not plugged in or turned
on at the wall.
Check the front panel. If nothing
is illuminated then it is a power
issue - please check power
socket and plug socket.
Remote control is not
working
Your display isn’t able to display the
current Output Format.
No batteries or batteries incorrectly
inserted.
Insert the supplied 2x AAA batteries
as shown on page 7.
Batteries are flat.
Insert fresh batteries as shown on
page 6.
The Infrared reciever on T1050 is
obstructed.
Check that there is a clear “line of
sight” from the remote to the sensor
on the front panel.
Picture is distorted -
too wide or narrow
Wrong TV shape is set.
Go to Main Menu/Installation/System
Setting/Aspect Ratio, make sure it is
set to match the shape of your display.
Please make sure that Main Menu -
Installation - System Setting - HD
Resolution is set to one that
your TV will be able to display.
You can view this using the
composite output
Problem
Possible Causes
Solution
No Channels loaded.
Database is Empty
No Signal In.
UHF aerial Cable not plugged into RF in.
Your UHF signal levels are to low for
the aerialBox-Ultra to operate.
Have your signal levels checked then try
Main Menu/Installation/Factory Default
and scan again.
Summary of Contents for aerialBox-ultra T1050PVR
Page 1: ...User Manual aeria aerialB x ultra ultra...
Page 25: ...25...
