9
Figure 3. Installation Summary
without Identified Devices
5.
If the
Installation Summary
does not show that Check Switch
completed successfully as shown in step 4, check your connections
on all cables at the receivers, switches, and LNBFs, and then run
Check Switch again.
6.
If you still do not see the
Satellite reception verified
message,
turn the receiver off and reconnect your it directly to the LNBF so
you can upgrade your receiver’s software (see your receiver’s user
guide for more information). After receiving the upgrade, reinstall
your DP21 and run check switch.
Instructions_Small.fm Page 9 Tuesday, January 14, 2003 2:08 PM
