Attention and Warning Symbols
You must be aware of safety when you install and use this system. This guide provides various procedures.
If you do some of these procedures carelessly, you could injure or kill yourself or damage equipment or
property. Some other procedures require special attention.
Important Safety Instructions
You must keep safety in mind when you install and use the D1000.4 EA or the D1000.4 WA satellite
reflector. Refer to the safety instructions in this guide. In this guide, the following notes tell you when you
need to pay special attention:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
Keep the following in mind when you install the D1000.4 EA or the D1000.4 WA satellite reflector:
•
Before you drill any holes in your building, make sure there are no wires or pipes near the holes.
•
Install the equipment in accordance with the local building and electrical codes. If you are not sure,
call a licensed building inspector or electrician for help.
•
Never install the satellite reflector near power lines.
•
Don’t install the satellite reflector on composite materials such as strand, chip, fiber, or particle
board unless the fastener attaches securely to a wall stud, rafter, or other foundation material
beneath the surface.
Note to Satellite TV System Installer
: This reminder is to call the satellite TV system installer’s
attention to the guidelines for grounding the system in accordance with the National Electrical
Code (NEC)® as referenced in Articles 250, 810, and 820. These sections cover the conductor insulation,
material, size, length, and connection requirements.
Marks a procedure where the following may happen:
• Personal injury or death may occur.
• Equipment or property may be damaged.
Marks the following issues:
• Important operation or maintenance instructions follow.
• Special attention is required.
Satellite Dish
Coaxial Cable
from Satellite Dish
Electric Service Equipment
Ground Clamps
Power Service Grounding
Electrode System
(NEC Art. 250, Part H)
Antenna Discharge
Unit
Ground Clamp
Grounding Conductors
(NEC Section 810-21)
Summary of Contents for D1000.4 EA
Page 30: ...Notes...
