Page 10
Optional. Use only if connecting more than three receivers
.
Connect LNBF and
switch
. Remove the temporary cable used for peaking the satellite reflector.
Eastern Arc—Connecting the DPP 1000.4 Eastern Arc LNBF to a DPP44
Switch
The DPP 1000.4 Eastern Arc LNBF can be connected to provide 61.5ºW, 72.7ºW, and 77ºW satellite
signals to a DISH Pro Plus 44 switch. Refer to the instructions provided with the switch for
additional considerations and instructions. Signal for a fourth satellite location must be provided
directly from the fourth satellite location’s LNBF to the DPP switch (see Figure 11). The
LNB I
N
port
on the DPP 1000.4 Eastern Arc LNBF must not be connected. In this installation, the DPP 1000.4
Eastern Arc LNBF defaults to the following settings:
P
ORT
1
—77ºW
P
ORT
2
—72.7ºW
P
ORT
3
—61.5ºW
LNB I
N
—Disabled when DPP 1000.4 Eastern Arc LNBF is connected to a switch. When connected
to a switch, any LNBF connected to the
LNB I
N
port must be disconnected from the DPP 1000.4
Eastern Arc LNBF and connected directly to that switch.
Note
: The DPP 1000.4 Eastern Arc LNBF is NOT compatible with DISH Pro switches or the DISH
Pro Plus 33 Switch in any installation.
Figure 11. Eastern Arc DPP 1000.4 and DPP44 Switch Connection
Eastern Arc
DPP 1000.4
LNBF
Another
DISH Network
Satellite Location
77°
Note:
Power inserter
must be connected to port 1.
72.7°
61.5°
LNB In disabled
61.5°
77°
61.5°
72.7°
77°
72.7°
Summary of Contents for D1000.4 EA
Page 30: ...Notes...
