Hornet
Page 4
Hornet Encoder / Decoder
Configuration
Enter the IP address in a browser. You will be presented with the
following Encoder Control Page:
Encoder Control
Encoder Control page will list all Hornet devices in your network along
with their current status. The Hornet that you logged in to is shown as
the current device.
The example above shows three Hornets, the first one is “this” Hornet
and shows the Device Name as the default Serial Number. It shows
that it is now has a 1080p video input, and that it is streaming.
Note that from “this” device, you can configure other device’s settings.
Configure Encoder Settings
In most cases, the encoder
settings are automatically set
by the Discover Video server
(see Output Settings), and
anything you set here will be
changed by the server. If not
using the server, then you can
make changes here.
Video Scaling allows you to
set the output stream
resolution to be the same
(“Passthrough”) or different
than the input video
resolution.
