Fig. 10
USB head
Fig. 11
Flush mounted to dash
B.
Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of module and
mount USB support bracket (See
Fig. 12
) to surface using
adhesive/tape or screws (included).
Fig. 12
USB mounting bracket
2.
Insert male terminal through hole in bracket (See
Fig. 13
) and connect
to USB port (See
Fig. 9
)
Fig. 13
3.
Snap USB head (See
Fig. 10
) to bracket until flush (See
Fig. 14
)
Fig. 14
4.
Tuck and secure any extra wire away from moving parts and proceed to
next step
