Optional charging kit
Optional charging kit can be added to support BC1.2, QC2.0, QC3.0, PE1.1, PE2.0,
FCP, SFCP fast charge protocols (Samsung, Huawei etc.).
Features:
» Input voltage:
6-24V DC
» Working current:
30mA
» Default output voltage:
5V or 3V-12V
(if device supports it)
» Max output power:
24W
Should you decide to add this option, we suggest one of 3 install options:
A
.
Flush to dash/panel requires drilling a ¾” hole
B
.
Flush with Support bracket
(Mount USB terminal wherever your installation
demands without drilling)
C
.
USB terminal-
(Freestanding default)
A.
Flush to Dash or Panel
(drilling required)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent (See
Fig. 7
)
Fig. 7
Step drill bit
2.
Insert supplied 3ft. USB male terminal (See
Fig. 7
) through hole created in
step 1 and connect to module USB port (See
Fig. 9
)
Fig. 8
Flush mount 3 ft. USB cable
Fig. 9
USB port
3.
Snap USB head (See
Fig. 10
) in place and flush with mounting surface
(See
Fig. 11
)
