Module pairing
Pairing varies among devices but basic steps are the same. This process is done
upon initial install and will not have to be repeated.
1.
Turn ignition and r
adio “ON”
Blue LED through module peephole will flash (pairing mode)
2.
On A2DP device: go to
Bluetooth Settings
3.
Select
Bluetooth
and turn on
4.
Tap
Scan for devices
.
5.
Wait for Bluetooth device name (LANNI) to appear and tap it.
Once
paired Blue LED through peephole will blink once every 3 seconds and
confirmation tone is heard on car speakers
One connection
The A2DIY-MBCD connects to one device at a time. First device must be
disconnected in order to pair a second device or simply turn OFF Bluetooth on
first device.
Warning!
Voice recognition (VR) applications (e.g., Siri, Google Play etc.) must
be enabled on device as you would in portable mode.
Media button
Pairing:
Ensure Bluetooth is enabled on your device (e.g., Smartphone/Tablet
etc.) scan/search for available devices and select BT009 from list. Media
button can be paired with multiple devices but can only operate one at a time.
Installing
:
Attach button to steering wheel (includes holder) or dashboard to safely and
conveniently control multi-media functions even when smartphone is out of
reach
.
Charging:
Media button has a built-in rechargeable 200mAH battery which may last up to
10 days. Use supplied USB cable to connect media button to charging source.
Reaches full charge after 2 hours.
