6.
Carefully route microphones plug down pillar, under steering column
and into radio cavity.
7.
Connect to
“MIC”
jack on module (See
Fig. 8
)
Excursive caution when routing microphone so to not damage the
cable and ensure no ventilation ducts are pointed towards
microphone
.
Optional charging kit
This fast charge USB kit can be added to any vehicle. It supports BC1.2, QC2.0,
QC3.0, PE1.1, PE2.0, FCP, SFCP fast charge protocols (Apple, Samsung, Huawei
etc.)
Note:
iPhone "Fast charge" kicks in when battery capacity is between 0-79%,
and return to regular charge mode when it reaches 80%.
Should you decide to add this kit, we suggest one of 3 connecting options:
A
.
Flush to dash/panel requires drilling a ¾” hole
B
.
Flush with Support bracket
(Mount USB terminal wherever your installation
demands without drilling)
C
.
USB port-
(default)
A.
Flush to Dash or Panel
(drilling required)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent
Step drill bit
2.
Insert supplied 3ft. USB male terminal (See
Fig. 11
) through hole
created in step 1 and connect to USB charging port (See
Fig. 12
)
Fig. 11
Flush mount 3 ft. USB cable
Fig. 12
USB port
