4.
If NOT retaining XM (Expired subscription):
Connect male-to-male cable audio cable (See
Fig. 4
) to module
“
AUX
”
jack (See
Fig. 5
)
Fig. 4
3.5mm male to male cable
Fig. 5
Module
5.
Secure visor microphone (See
Fig. 6
) to visor or headliner using
included visor clip (See
Fig. 7
)
Fig. 6
Microphone
Fig. 7
Visor clip
6.
Route microphone (See
Fig. 6
) down pillar, under driver kick panel and
across
to radio cavity and connect to module “MIC” jack (See
Fig. 5
)
Be cautious not to damage or cut both microphone cable.
7.
Connect installation harness
Red wire
to
12V Accessory supply
in
vehicle.
Do not use 12V constant supply (battery).
Tip
: Accessory (ACC) is available from fuse panel.
Accessory power is active when ignition is in “ACC” or “
ON
“positions.
8.
Connect installation harness
Black
wire ring terminal to radio chassis
by removing chassis screw and secure ring terminal or ground to
alternate location.
