4.
Route microphone plug/cable (10 ft. long) down side pillar, under steering
column and into radio cavity,
5.
Connect microphone plut
to module “MIC” input. (See
Fig. 4
)
Wind noise (Convertibles) will negatively affect phone audio. Users are
advised to install microphone away from wind/ventilation ducts etc.
Visor microphone
Fig. 3
Fig. 4
Module
Pairing
The pairing process varies between devices but the basic steps are the same.
This process is done upon initial install and will not have to be repeated
1.
Turn Ignition and r
adio “ON”
Adapter LED will flash (pairing mode)
2.
On A2DP device: Go to
Settings, Wireless & Networks, Bluetooth
Settings
3.
Select
Bluetooth
and turn on.
4.
Then select Bluetooth settings
5.
Tap
Scan for devices
.
6.
Wait for the Bluetooth device name to appear and select it. (See below)
Adapter LED will glow steady
Notes:
1.
New!
On incoming calls, ring tone and call number announced on car speaker.
Additional tone (static) heard during call number announcement is normal
2.
On some Chrysler radios (dependent on software version); the
SEEK
button
can be used to change tracks, answer/reject calls.
3.
*Media remote does not control Chrysler radio functions.
