Fig. 7
Microphone
Fig. 8
Visor clip
9.
Route microphone right angle plug (See
Fig. 7
) down pillar, under
driver kick panel into radio cavity.
10.
Connect microphone to module “MIC” input jack (See
Fig. 9
)
Fig. 9
Be cautious not to damage or cut microphone cable.
Optional Fast charging USB port
With optional USB “Fast charging” kit –users are able to keep devices
charged while on the road. Custom install in a convenient location and
discover how this charger is a massive improvement over many anemic
aftermarket cigar lighter chargers etc.
To add charging kit to order, tap option on order page or
Optional USB port
Should you decide to install, we suggest one of 3 connecting options:
A
.
Flush to dash/panel requires drilling a ¾” hole
B
.
Flush with support bracket
(Mount USB terminal wherever your installation
demands without drilling)
A.
Flush to dash or panel
(drilling required)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent
(See
Fig. 10
)
Fig. 10
Step drill bit
